PDS_VERSION_ID                 = PDS3
LABEL_REVISION_NOTE            = "2006-06-19 D. Humm (APL),
                                  Replaced manually created .LBL
                                  file with file generated by
                                  IDL program that bins the images,
                                  changed units to 
                                  W / (m**2 micrometer sr); 
                                  2006-09-22 D. Humm, changed 
                                  MRO_FP_ELECTRONICS_TEMP to
                                  MRO_FPE_TEMPERATURE
                                  2006-10-06 D. Humm, version 1,
                                  lamp 1 responsivity from simple
                                  dark-subtracted 1 Hz ground data; lots
                                  of uncorrected bad pixels from 
                                  ground sphere data, lamp 2 responsivity
                                  still =1 by definition, still no 
                                  sphere T or frame rate dependence"

/*( NOTE: Comments in this label that are delimited with parentheses,     )*/
/*( for example:                                                          )*/
        /*( comment )*/
/*( are notes to the data provider. These comments should be removed      )*/
/*( from the final label.  Comments without parentheses, for example:     )*/
        /* comment */
/*( are intended to be part of the final label.                           )*/

/* Level 4 CDR (Calibration Data Record) Identification */

DATA_SET_ID                    = "MRO-M-CRISM-4/6-CDR-V1.0"
PRODUCT_ID                     = "CDR410000000000_SS0200012L_2"

                               /*( CDR4Ptttttttttt_pprbeeewsn_v           )*/
                               /*( P = partition of sclk time             )*/
                               /*( tttttttttt = s/c start or mean time    )*/
                               /*( pp = calib. type from SIS table 2-8    )*/
                               /*( r = frame rate identifier, 0-4         )*/
                               /*( b = binning identifier, 0-3            )*/
                               /*( eee = exposure time parameter, 0-480   )*/
                               /*( w = wavelength filter, 0-3             )*/
                               /*( s = side: 1 or 2, or 0 if N/A          )*/
                               /*( n = sensor ID: S, L, or J              )*/
                               /*( v = version                            )*/

PRODUCT_TYPE                   = CDR
SPACECRAFT_ID                  = MRO
INSTRUMENT_ID                  = CRISM
START_TIME                     = 1980-01-01T00:00:00.000
STOP_TIME                      = NULL
SPACECRAFT_CLOCK_START_COUNT   = "1/0000000000" 
SPACECRAFT_CLOCK_STOP_COUNT    = NULL 
OBSERVATION_TIME               = NULL
PRODUCT_CREATION_TIME          = 2006-10-11T23:30:00

OBSERVATION_TYPE               = NULL 
OBSERVATION_ID                 = NULL 
MRO:OBSERVATION_NUMBER         = NULL 
MRO:ACTIVITY_ID                = NULL 
SOURCE_PRODUCT_ID              = NULL
MRO:SENSOR_ID                  = "S" 
PRODUCT_VERSION_ID             = "2" 

/* CDR Instrument and Observation Parameters */

SAMPLING_MODE_ID               = "MULTISPEC" 
MRO:WAVELENGTH_FILE_NAME       = "CDR6_1_0803692813_WV_L_0.TAB"
MRO:DETECTOR_TEMPERATURE       = NULL 
MRO:OPTICAL_BENCH_TEMPERATURE  = NULL 
MRO:SPECTROMETER_HOUSING_TEMP  = NULL 
MRO:SPHERE_TEMPERATURE         = NULL 
MRO:FPE_TEMPERATURE            = NULL 
SHUTTER_MODE_ID                = SPHERE 
LIGHT_SOURCE_NAME              = "SPHERE LAMP 1" 
MRO:CALIBRATION_LAMP_STATUS    = "CLOSED LOOP" 
MRO:CALIBRATION_LAMP_LEVEL     = 1400 
MRO:FRAME_RATE                 = NULL 
PIXEL_AVERAGING_WIDTH          = 5  /*( pixel bin size, across track )    */
MRO:EXPOSURE_PARAMETER         = NULL
MRO:WAVELENGTH_FILTER          = "1" 

/* This Level 4 CDR label describes one calibration data file. The file   */
/* is a multiple-layer image cube file derived from ground data.  It      */
/* consists of 3 binary images followed by a list of row numbers          */
/* corresponding to the wavelength filter.                                */

/* Layers 0, 1, and 2 of the cube give constant (theta), linear (sigma),  */
/* and quadratic (tau) coefficients, respectively, of the sphere          */
/* radiance model SR = theta + sigma * T + tau * T^2.                     */
/* T = MRO:SPHERE_TEMPERATURE in Celsius.  These coefficients             */
/* apply when sphere lamp 2 of the onboard calibration source is used at  */
/* its normal setting in closed-loop mode controlled by the photodiode.   */
/* As of 19 June 2006, the normal setting is 1130, and it is not          */
/* expected to change.  Sphere lamp 2 is the VNIR-FPE-controlled, or      */
/* "across-slit" lamp, which is the rarely-used secondary lamp.           */
/* Radiance is in the units W / (m**2 micrometer sr).                     */

/* Description of CDR IMAGE file */

OBJECT                         = FILE
  ^IMAGE                       = "CDR410000000000_SS0200012L_2.IMG"

  /* offset is in file records, which is just (imgbands*imglines) + 1 */
  ^ROWNUM_TABLE = ("CDR410000000000_SS0200012L_2.IMG", 56 )

  RECORD_TYPE   = FIXED_LENGTH 
  RECORD_BYTES =  512 /* one row now, not one frame to save space in table */
  FILE_RECORDS =  166 /* compute by ROUND ((imgbands * imglines *          */
                      /*                    line_samples * samplebits/8 +  */
                      /*                    tablerows * tablerowbytes) /   */
                      /*                    record_bytes + 0.5 )           */
  OBJECT                       = IMAGE
    LINES                      = 3
    LINE_SAMPLES               = 128
    SAMPLE_TYPE                = PC_REAL
    SAMPLE_BITS                = 32
    BANDS                      =  55
    BAND_NAME                  = NULL
    BAND_STORAGE_TYPE          = LINE_INTERLEAVED
    DESCRIPTION                = "Sphere radiance model SR = theta + sigma * T + 
                               tau * T^2, where T = MRO:SPHERE_TEMPERATURE in 
                               Celsius. Band 1: Constant term (theta) for onboard 
                               calibration sphere radiance as a function of sphere 
                               temperature. Band 2: Linear term (sigma) for 
                               onboard calibration sphere radiance as a function 
                               of sphere temperature. Band 3: Quadratic term (tau) 
                               for onboard calibration sphere radiance as a 
                               function of sphere temperature."
    UNIT                       = "W / (m**2 micrometer sr)"
  END_OBJECT                   = IMAGE

  /* be sure to pad this object to a full record (2560/bin bytes here)      */
  OBJECT = ROWNUM_TABLE 
    NAME               = "SELECTED ROWS FROM DETECTOR" 
    INTERCHANGE_FORMAT = "BINARY" 
    ROWS               =  55
    COLUMNS            = 1
    ROW_BYTES          = 2
    DESCRIPTION   = "The detector is subsampled in the spectral direction
                     by selecting specific rows to be downlinked.  This
                     table provides a list of the rows selected for all
                     frames in this multidimensional image cube."

    OBJECT = COLUMN
      NAME          = DETECTOR_ROW_NUMBER
      DATA_TYPE     = MSB_UNSIGNED_INTEGER
      BIT_MASK      = 2#0000000111111111#
      START_BYTE    = 1
      BYTES         = 2
      DESCRIPTION   = "Detector row number from which the data was taken."
    END_OBJECT = COLUMN

  END_OBJECT = ROWNUM_TABLE

END_OBJECT                     = FILE

END